| Scope of application: | Suitable for anti-corrosion performance in chemical plants, electroplating plants, sewage treatment, etc |
| Coating characteristics: | The surface of the layer is flat and smooth |
| Seamless, dust-free, and easy to clean surface |
| Has excellent chemical resistance |
| Sufficient flatness and decorative properties |
| Good mechanical strength |
| TECHNICAL INDEX | Drying time - surface drying: ≤ 4H |
| Drying time - practical: ≤ 24 hours |
| Pencil hardness: ≥ 2H |
| Impact resistance (500g steel ball): through g'cm |
| Wear resistance (750g/500r): ≤ 0.02g |
| Resistant to ≤ 80% sulfuric acid |
| Resistant to hydrochloric acid |
| Resistant to ≤ 40% nitric acid |
| Resistant to ≤ 50% acetic acid |
| Resistant to sodium hydroxide |
| construction procedure | Base layer → Ethylene based paint → Fiberglass cloth pasting → Ethylene based intermediate coating with sand → Scratching ethylene based intermediate coating → Rolling ethylene based paint |
|
| Construction procedures | Coating thickness: generally 1mm-3mm. If it exceeds 2mm, it needs to be sandblasted |
| Personnel can only enter after 24 hours of construction completion, and heavy pressure can only be applied after 72 hours. (Based on 25 * C, the low-temperature opening time needs to be moderately extended) |
