| Scope of application: | High end places with high requirements for mechanical performance and aesthetics, such as cigarette factories, cosmetics, pharmaceutical factories, shopping malls, exhibition halls, car showrooms, etc |
| Coating characteristics: | Excellent corrosion resistance and wear resistance |
| Colorful sand particles form a beautiful surface |
| Multiple colors of sand can be pieced together to create various patterns |
| Sufficient surface flatness and roughness |
| TECHNICAL INDEX | Drying time - surface drying: ≤ 4H |
| Drying time - practical: ≤ 24 hours |
| Shore hardness: ≥ 90 |
| Wear resistance (750g/500r): ≤ 0.02g |
| Adhesive strength: ≥ 2mpa |
| Compressive strength: ≥ 80mpa |
| Resistant to 10% sulfuric acid: no significant change after 7 days |
| Resistant to 20% sodium oxide gas: no significant change after 7 days |
| Resistant to gasoline 120 # #: No significant change after 7 days |
| Construction procedures | construction method | Main materials - auxiliary materials | Reference amount |
| Plain ground | Do a good job in waterproofing treatment |
|
|
| undercoat | Scrape and apply solvent-free base oil | DS-10 | About 0.15kg/m ² |
| screed | Use solvent-free coating to scrape 100 mesh quartz sand | DS-410- Quartz sand | 0.4kg/m²
|
| Putty layer | Apply and scrape putty layer in solvent-free medium | DS-410 | 0.15kg/m2 once |
| top coat | Float coated colored sand self leveling | DS-900 | 2.0---2.5kg/m2 |
| After completion, the overall floor will be bright and clean, with uniform color and no hollowing |
| Construction procedures | Coating thickness: generally 1mm-3mm. If it exceeds 2mm, it needs to be sandblasted |
| Personnel can only enter after 24 hours of construction completion, and heavy pressure can only be applied after 72 hours. (Based on 25 * C, the low-temperature opening time needs to be moderately extended) |
