| Scope of application: | Ultra wear-resistant gold diamond nano flat coating is a three component color paint that uses a new type of alloy nano material. It is a floor coating with super strong wear resistance and is currently the most wear-resistant product on the market. Its wear resistance is three times higher than that of polyurethane, and it is mainly used for floors with high wear resistance coefficients |
| Coating characteristics: | Superb wear resistance and scratch resistance |
| Specially suitable for heavy industry flooring |
| Particle surface, anti slip and easy to clean |
| Coating resistance to impact, weather resistance, and long-lasting service life |
| TECHNICAL INDEX | Drying time - surface drying: ≤ 1H |
| Drying time - practical: ≤ 14H |
| Morse hardness: ≥ 8H |
| Impact resistance (500g steel ball): through g'cm |
| Wear resistance (750g/500r): ≤ 0.02g |
| Adhesive strength: ≤ Level 2 |
| Resistant to 3% saline solution: no significant change for 7 days |
| Water resistance: No significant change after 7 days |
| Resistant to 20% sodium oxide gas: no significant change after 7 days |
| Resistant to gasoline 120 # #: No significant change after 7 days |
| construction method | Base layer → Epoxy primer layer → Epoxy 2-layer → Epoxy putty layer → Roll coating of same color paint → Roll coating of super wear-resistant flat topcoat |
|
| Construction procedures | Coating thickness: generally 1mm-3mm. If it exceeds 2mm, it needs to be sandblasted |
| Personnel can only enter after 24 hours of construction completion, and heavy pressure can only be applied after 72 hours. (Based on 25 * C, the low-temperature opening time needs to be moderately extended) |
