Detailed introduction
| Product composition | Prepared from acrylic resin, pigments, additives, solvents, weather resistant aliphatic curing agents, etc | |||
| Performance and Usage | This product has a high gloss coating, good adhesion, excellent weather resistance, color retention, salt spray resistance, and mechanical and physical properties | |||
| Suitable for surface coating of offshore and onshore facilities, mechanical products, steel structures, and building exterior walls | ||||
colour | Comply with the sample and its color difference range | |||
| Technical Parameter | Dry film thickness -50 µ m | |||
| Wet film thickness -85 µ m | ||||
| Theoretical dosage: 7-8 ㎡/kg (calculated based on a dry film thickness of 50 µ m) | ||||
| Drying time (25 ± 1 ℃) - surface drying ≤ 2 hours; Practical work ≤ 24 hours | ||||
| Proportion - Component A: Component B=10:1.5 (weight ratio) | ||||
| Maturity time -10-15 minutes | ||||
| Applicable time -2 hours (25 ℃) | ||||
| Gloss (60 °) - ≥ 90 | ||||
| Front supporting paint | One dish per day (25 ℃) | |||
| Front supporting paint | epoxy primer | |||
| Substrate temperature | 3 ℃ above dew point | |||
| instructions | 1；The previous coat of paint must be completely dry, and the surface of the workpiece must be degreased and cleaned. For the two-component paint film that has been cured for a long time, it is necessary to polish it with fine sandpaper before applying a topcoat | |||
| 2；Mix the components A and B in a ratio of 10:1.5 (by weight), stir thoroughly, and add 15-40% of the matching solvent according to the construction situation to adjust the construction viscosity. Filter through a 100 mesh sieve and let it stand for 10-15 minutes before use | ||||
| 3；When spraying construction elbows with air, the construction equipment and compressed air should be dehydrated to avoid affecting the quality of the paint film | ||||
| 4；After mixing two components, they should be used up within the specified time | ||||
| 5；Painting methods: spray coating, roller coating, brush coating | ||||
| 6；To ensure quality, please use the matching acrylic paint thinner | ||||
| Storage period | Sealed storage in a cool and dry place, with a shelf life of 12 months. If it exceeds the shelf life and passes inspection, it can still be used | |||
